Owner's manual

Page
27
93. Remove the OEM plastic cover and drill
three 1/4” holes in the marked locations.
94. Re-install the OEM plastic cover and install
the fuse holders using the three (3) supplied
Christmas tree style push fasteners (PN
MP1026).
95. On the passenger side of the vehicle near
the headlight, locate the ground bolt that
is behind the rubber ap as shown in the
image to the left.
96. Bring the three (3) ground eyelets from the
wiring harness forward to this location and,
using a 10mm wrench or socket, undo the
ground bolt.