Owner's manual

Page
19
61. Using a 13mm socket, loosen the top bolts,
one on each brace.
62. Then loosen the bottom bolts, these are
located between the impact bar and AC
condenser.
63. Remove the passenger side brace above
the power steering cooler by removing the
upper and lower bolts with a 13mm socket.
64. Using a 1/4” bit, drill three holes in the
bracket with proper spacing for the relays to
mount side by side. Also be sure to space
the holes such that the existing holes for the
plastic Christmas tree fasteners used for the
OEM harness clips are also still able to be
used.