Owner's manual

Page
9
21. Remove the OEM power steering cooler
assembly.
23. To drain the intercooler system of coolant,
using a 3/8” square drive extension, remove
the drain tting from the passenger side of
the intercooler radiator. Have a drain pan
positioned to catch the uid.
Inspect the uid. If it is normal in
appearance, it can used again. If it is
discolored then we recommend ushing the
system of the old uid and using all new
intercooler uid.
24. Using a pair of hose clamp pliers, release
the tension on the hose clamps and remove
both the in and out hoses from the stock
intercooler radiator.
Note: You will be re-using the stock hose
clamps and some of the stock hoses.
22. In order to make it easier to drain the uid
from the system, remove the cap from the
intercooler uid reservoir. The reservoir is
located at the back of the engine on the
passenger side near the rewall.