Manual

Page 2.
1. Open the hood. If you have been driving
your vehicle, allow time for it to cool down before
beginning this installation.
2. Using a 10 mm socket, install the supplied
bracket (PN: XX04468-0010) on to the hood
latch for the coolant reservoir using the existing
fastener.
3. Loosely install the supplied
M6x1x16mm bolt (PN: 47313) and M6 washer
(PN: 91116A150) into the coolant reservoir (PN:
XX04468-0015) and slide the assembly into the
bracket installed in the previous step. Tighten the
bolt to secure the coolant reservoir to the bracket.
4. Using a spring or constant tension clamp,
connect the rear intercooler hose to the top
coolant reservoir tting.