Manual

Page 1.
Parts List
C5 Intercooler Fluid Reservoir Kit
# Description Part number
1 Intercooler uid reservoir, 3.7L (0.98 gallon) capacity XX04468-0015
1 Intercooler reservoir bracket, black anodized XX04468-0010
1 Fender washer for intercooler reservoir bracket 91116A150
1 M6-1.00x16mm hex head bolt, stainless steel 47313
1 16 psi pressure cap, intercooler uid 703-1726
1 Lingenfelter decal L920010000
4 Instructions N/A
Tools & Materials Required
Additional Required Components
• 10mm socket
• Ethylene glycol, green
Description Part number
Spring clamp, 1-1/16” hose OD (quantity varies) 7329K16
OR
Constant tension clamp, 9/16” band width,
13/16” - 1-1/2” clamp ID (quantity varies) 54205K11
Thank you for purchasing the Lingenfelter Performance Engineering (LPE) 1997-2004 C5
Corvette Intercooler Fluid Reservoir Kit. This kit includes the intercooler uid reservoir,
as well as the parts necessary to mount the reservoir directly above the battery. The LPE
C5 intercooler uid reservoir has a uid capacity of 3.7 Liters (0.98 Gallons) and can be
used on virtually any supercharged or turbocharged C5 Corvette application.
Read the entire instruction manual before beginning installation. Some stock parts will
be used in reassembly.
The LPE intercooler uid reservoir is designed to be used with hoses that have a 3/4”
inner diameter.
Due to the expansion and contraction of the hoses in extreme temperatures, LPE
recommends that either spring clamps (PN: 7329K16) or constant tension clamps (PN:
54205K11) be used for fastening the hoses to the intercooler uid reservoir. Worm
clamps do not adjust when the hoses contract, which could lead to the hoses leaking.
Because the intercooler uid reservoir will be installed directly above the battery, it is
necessary for the vehicle to have a side post battery in order to allow for the necessary
clearance under the hood. Cars equipped with top post batteries, such as the 2004 C5
Corvette, will need to be converted to a side post battery before installation can begin.