C5 Corvette Intercooler Fluid Reservoir Kit PN: L300165297 Revision - 1.2 Lingenfelter Performance Engineering 1557 Winchester Road Decatur, IN 46733 (260) 724-2552 (260) 724-8761 fax www.lingenfelter.
Parts List C5 Intercooler Fluid Reservoir Kit # 1 1 1 1 1 1 4 Description Intercooler fluid reservoir, 3.7L (0.98 gallon) capacity Intercooler reservoir bracket, black anodized Fender washer for intercooler reservoir bracket M6-1.
1. Open the hood. If you have been driving your vehicle, allow time for it to cool down before beginning this installation. 2. Using a 10 mm socket, install the supplied bracket (PN: XX04468-0010) on to the hood latch for the coolant reservoir using the existing fastener. 3. Loosely install the supplied M6x1x16mm bolt (PN: 47313) and M6 washer (PN: 91116A150) into the coolant reservoir (PN: XX04468-0015) and slide the assembly into the bracket installed in the previous step.
5. Route the hose from the bottom coolant reservoir fitting to the intercooler pump inlet and secure to the bottom reservoir fitting and the pump using spring clamps or constant tension clamps. 6. Fill the intercooler reservoir with green ethylene glycol. Screw on the pressure cap supplied in the LPE kit (PN: 703-1726). Refer to figure 1 on page 4 for the boiling points of different ethylene glycol aqueous solutions at different pressure levels.
Page 4. Boiling Point (in Degrees Fahrenheit) 200.00 210.00 220.00 230.00 240.00 250.00 260.00 270.00 280.00 290.
For additional product installation information and technical support, contact LPE or your LPE products distributor. You can also find technical support and usage discussions regarding this product and many other LPE products in our Internet forums: http://www.lingenfelter.com/LPEforumfiles Lingenfelter Performance Engineering 1557 Winchester Road Decatur, IN 46733 (260) 724-2552 (260) 724-8761 fax www.lingenfelter.com C5 Intercooler Fluid Reservoir Kit v1.2indd Page 5.
