User Manual
Page 6.
17. Reinstall the end of the hose to the tting just
below the radiator support.
18. Add coolant (should be a 50/50 mixture
of DEX-COOL antifreeze and tap water or
distilled water) into the reservoir. Fill the
reservoir until the uid reaches the parting
line on the outside of the reservoir. The
coolant reservoir has a uid capacity of
roughly 4 liters. Install the 16 psi pressure
cap (PN: L300170016).
Installation of the LPE ZL1 Camaro Intercooler
Fluid Reservoir Kit is now complete.
For additional product installation information and technical support, contact LPE or your LPE
products distributor. You can also nd technical support and usage discussions regarding
this product and many other LPE products in our Internet forums:
http://www.lingenfelter.com/LPEforumles
Lingenfelter Performance Engineering
1557 Winchester Road
Decatur, IN 46733
(260) 724-2552
(260) 724-8761 fax
www.lingenfelter.com
L300152012 ZL1 Intercooler Coolant Reservoir Kit v1.2.indd