User Manual

Page 5.
13. After applying silicone lubricant to the inside
of the hose, attach the hose to the 90 degree
tting. Using a set of Oeticker clamp pliers
(or equivalent), secure the hose to the tting
with the supplied Oetiker clamp.
14. Pull the other end of the hose off of the
coolant reservoir and slide a constant tension
clamp onto the hose. After applying silicone
lubricant to the inside and outside of the
hose, push the hose onto the rear coolant
reservoir nipple, and use a set of constant
tension clamp pliers (or equivalent) to move
the constant tension clamp into position.
15. Reconnect the stock upper charge air cooler
coolant hose to the upper quick connect
tting on the supercharger.
16. Reinstall the upper hose into the retaining
ring located behind the passenger side
radiator fan.