User Manual
Page 1.
Parts List
LPE Intercooler Fluid Reservoir Kit (PN: L300152012)
# Description Part number
1 High capacity intercooler reservoir RFB10155014
1 Pressure Cap, 16 psi L300170016
1 90 degree heater hose 9820
3 Constant tension clamp, for 15/16” OD hose 7329K15
1 22.6mm Oetiker clamp 52545K72
1 Lingenfelter decal L920010000
1 Instructions N/A
Tools & Materials Required
Additional Required Components
• 7/8” open-ended wrench
• Hose cutter
• Teon thread sealant (liquid)
• Razor blade (or equivalent)
• Constant tension clamp pliers (or equivalent)
# Description Part number
1 ZL1 Camaro Air Intake Kit L650162012
• Spring-loaded hose clamp pliers (or
equivalent)
• Silicone lubricant
• Coolant- 50/50 DEX-COOL antifreeze and tap
water (distilled water can be substituted for
tap water)
Thank you for purchasing the Lingenfelter Performance Engineering (LPE) Intercooler uid reservoir
Kit for the ZL1 Camaro. The ZL1 Camaro does not come from the factory with an intercooler uid
reservoir, which means that the only available uid is the uid running through the lines. The LPE
intercooler uid reservoir is capable of storing up to an additional four liters of uid for the system. In
racing applications, the uid in the intercooler uid reservoir can be replaced with ice to help cool the
system between runs.
Read the entire instruction manual before beginning installation. Many of the stock parts will
be used in reassembly.
When referencing the side of the vehicle, the driver side of the vehicle is considered the left
side and the passenger side of the vehicle is considered the right side of the vehicle.
Due to where the LPE intercooler uid reservoir is mounted on the vehicle, the installation of
this kit requires the installation of an aftermarket airbox. This reservoir was designed to t
with the LPE ZL1 Camaro Air Intake Kit (L650162012). LPE cannot verify that this reservoir will
t with any other aftermarket air intake kits.
These instructions assume that you have already removed the stock airbox, as well as the
charge air cooler coolant hoses. The LPE intercooler uid reservoir can be installed after the
LPE ZL1 Camaro Air Intake Kit (L650162012) is installed, but LPE recommends installing the
intercooler uid reservoir before the air intake kit. Installing the intercooler uid reservoir rst
will give you more room for installation.