Owner manual

18
$028A
OBD command is no longer supported
Internal
Contact EFILive if this error persists.
$028B
Command Not Implemented
Internal
Contact EFILive if this error persists.
$028C
Not in pass through mode
Internal
Contact EFILive if this error persists.
$028D
PID configuration mismatch
Internal
A selected PID’s definition in the EFILive
software does not match the PID definition
in the target controller. Remove the
offending PID and contact EFILive support
so that the PID definition can be corrected.