Owner manual

17
OBD Error Codes ($0280..$02FF)
Error
Description
Cause
Action
$0280
Unsupported protocol (i.e. no vehicle
detected)
FlashScan or AutoCal could not detect a valid
OBD protocol.
Check all cables and connections.
Make sure ignition is turned on to the run
position.
Make sure the vehicle is supported by
EFILive.
$0281
No data received
FlashScan or AutoCal did not receive valid
data from the connected vehicle.
Check all cables and connections.
Make sure ignition is turned on to the run
position.
Make sure the vehicle is supported by
EFILive.
$0282
No such node
Internal
Contact EFILive if this error persists.
$0283
No such PID
Internal
Contact EFILive if this error persists.
$0284
Unknown PCI (Protocol Control Information)
Internal
Contact EFILive if this error persists.
$0285
Incorrect sequence ID
Internal
Contact EFILive if this error persists.
$0286
CAN, VPW or ALDL handler is busy
Internal
Contact EFILive if this error persists.
$0287
Dynamic packets are full
Internal
Contact EFILive if this error persists.
$0288
Response from controller not supported by
EFILive
Internal
Contact EFILive if this error persists.
$0289
PID selection is full
Internal
Contact EFILive if this error persists.