Owner manual

11
USB Error Codes ($0100..$017F)
Error
Description
Cause
Action
$0100
No USB connection
USB cable is faulty or not connected
Check USB cables, plugs and connections.
Try using a different USB port and/or
different USB cable.
$0101
No data received
USB cable is faulty or not connected
Check USB cables, plugs and connections.
Try using a different USB port and/or
different USB cable.
$0102
Transmit buffer is full
Internal
Contact EFILive if this error persists.
$0103
Received data message had no CRC data
Internal
Contact EFILive if this error persists.
$0104
Bad CRC on received data
Internal
Contact EFILive if this error persists.
$0105
Received data contained incorrect number
of parameters
Internal
Contact EFILive if this error persists.
$0106
Received data contained parameters that
were out of range
Internal
Contact EFILive if this error persists.
$0107
Received data message was too short
Internal
Contact EFILive if this error persists.
$0108
Received data message was too long
Internal
Contact EFILive if this error persists.
$0109
Received data message contained unknown
command group
The firmware on the device is out of date
Use the EFILive Control Panel software to
update the firmware to the latest version
available.