Owner's Manual

Secured Series Proximity Reader Installation Instructions
Document # 6065700 Rev 1.1 D2c 11/23/04
3
Step 4: Connect the Reader and Wiegand Interface Module to the Door
Control Module
Figure 1: Connecting an HID proximity reader (ProxPoint, Proxpro, ProxPro w/keypad,
MiniProx or ThinLine II) to the Wiegand Interface Module
BE SURE YOU ARE USING STRANDED/SHIELDED CABLE OF THE CORRECT GAUGE BETWEEN THESE UNITS.
To IEI
Door
Controller
To
Proximity
Reader
Head
See note 2 on page 1.