Quick Start Manual

Connect the 50-foot power cable assembly to the transformer exactly as shown in fi gure 1. The transformer must
be connected color for color as shown in fi gure 1. Note: The cable may be cut at the transformer end if wire length is
excessive, however, do not lengthen the cable longer than the 50-foot length supplied.
115806 D
PRINTER’S INSTRUCTIONS:
INSTR,INSTL,RT11 - LINEAR P/N: 115806 D - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 8.500” X 11.000” - SCALE: 1-1 - SIDE 2 OF 2
After the remote station wiring has been completed at the master unit, connect the power plug from the power
cable to the master unit. Mount the master unit to the wall . Check all functions by following the guidelines in the
operating guide shipped with the master unit. If any diffi culties are encountered, recheck all connections. If, after
reviewing these instructions and the instructions for your system, you are unable to resolve any problems, contact
technical support at 1-800-366-9422
Figure 2 Ground connection
Figure 1 Transformer connection