SOFTWARE DVS-1200 User guide

4.6 CONSOLE ALARMS

PURPOSE:

For setting the way the burglary, emergency and ﬁ re sirens work.

Also sets the options for the home-automation output during and after

alarms.

USER RESPONSE:

ALARMS

✦ BURGLARY ALARM: Select SILENT to disable the burglary siren or

select SIREN FOR SET TIME for a timed siren after activation. With

timed siren selected, enter the length of time (from 1 to 30 minutes)

for the burglary siren to run.

✦ EMERGENCY ALARM: Select SILENT to disable the emergency siren

or select SIREN FOR SET TIME for a timed siren after activation. With

timed siren selected, enter the length of time (from 1 to 30 minutes)

for the emergency siren to run.

✦ FIRE ALARM: Enter the length of time (from 1 to 30 minutes) for the

ﬁ re siren to run in the FIRE ALARM SIREN TIME area.

✦ HOME-AUTOMATION OUTPUT DURING SIREN TIME: Select NONE, FLASH,

or ACTIVE from the drop-down menu to choose the way the

home-automation output functions while the siren is running.

✦ HOME-AUTOMATION OUTPUT FLASHES DURING/AFTER ALARM: With this

box checked, the home-automation output will ﬂ ash during and after

an alarm until the Console is disarmed.

☞ NOTE: The home-automation output will activate steady if the

above option is set to ACTIVE.

217473 C - IMAGE 23