Quick Start Manual

25
COM Port USB Local Connection
During local USB programming, the Console will remain functional. Use
the following steps to directly connect to a Console using a USB cable:
1. Apply power to the Console.
2. Connect the Console to the programming computer with a Type A to
mini Type B USB cable.
3. Press the CONNECT button to display the Send/Receive window.
4. In the COM port Connection area, select the COM port that the
Console is connected to. Look for the port labeled STMicroelectronics.
5. Press COM Port Connect to connect to the Console. The progress is
displayed in the RA4200 connection status area.
6. When the connection is made, the green CONNECTED indicator will
display at the bottom of the RA4200 window.
7. When fi nished, press DISCONNECT to disconnect with the Console.
The red NOT CONNECTED indicator will display at the bottom of the
RA4200 window.
INSERT MINI-USB PLUG
INTO JACK ON REAR OF
THE PERS-4200 CONSOLE
FOR LOCAL
PROGRAMMING ONLY
INSERT USB PLUG
INTO PROGRAMMING
COMPUTER USB PORT
PERS-4200 CONSOLE
PROGRAMMING PC
USB Programming Connection