Owner's Manual

OPERATION & ADJUSTMENT INSTRUCTIONS

NOTE: It is now necessary to turn on the power

in order to run the Opener to check for proper

operation and limit settings. Before doing so, ensure

that all mounting hardware are installed and properly

tightened, that all electrical connections are per local code

requirements, and that proper wiring practices have been

followed.

Also, double-check that all ropes have

been removed from the door and that the doorway

is clear.

MOMENTARY CONTACT: Button can be pushed and then released and door will keep moving or stop without

maintaining pressure on the button.

CONSTANT PRESSURE: Constant pressure is required on the button in order for continued door movement. When

the button is released the door will stop and possibly reverse to full open depending on wiring type.

DOOR EDGE/PHOTOELECTRIC INPUT: The operator wiring provides for input from an optional pneumatic or

electric door bottom edge or photoelectric device that will cause a closing door to stop and may reverse it to open

depending on the wiring type.

OPEN OVERRIDE: When the door is closing a momentary push of the OPEN button will reverse the door to open.

WIRING TERMS

TO REDUCE THE RISK OF SEVERE INJURY OR

DEATH: READ AND FOLLOW ALL INSTRUCTIONS!

WARNING

FAILURE TO TEST REVERSING SYSTEM

COULD RESULT IN DEATH OR SERIOUS

INJURY. TEST THIS SYSTEM ONCE A MONTH.

WARNING