Owner's Manual

CONNECTING THE 4X2 SWITCHER FOR HDMI

OPERATING THE 4X2 Switcher For HDMI

Connect the supplied cables from the HDTV HDMI sources (up to four) into the 1.

HDMI input ports of the 4X2 Switcher for HDMI.

Connect the displays (up to two) to the HDMI output ports* of the 4X2 Switcher 2.

for HDMI using user supplied cable(s).

Optionally, connect an external audio processor to the 4X2 Switcher For HDMI 3.

using a user supplied digital coaxial cable.

Plug the 5V DC power supply into the 4X2 Switcher For HDMI.4.

NOTE: *Display information (EDID) is sent from the display connected to HDMI

Output Port 1 to all of the sources connected to the 4X2 Switcher for HDMI. If

there is no display connected to HDMI output port 1, the EDID from the display

connected to HDMI output port 2 will be used. The source will output resolutions

and timings according the EDID that is being fed by the 4X2 Switcher for HDMI.

Therefore, all of the connected displays must be capable of accepting the timings

and resolution output by the source. It is recommended that the display with the

lowest native resolution be connected to HDMI output port 1. This is to ensure that

a compatible video signal will be able to be displayed on all connected monitors.

Switching between the inputs on the 4X2 Switcher For HDMI is done using either

the supplied RMT4-IR remote or through the RS-232 serial control interface.

IR Remote Control

Pressing button one on the remote will select the HDMI source that is connected

to HDMI input port one. Pressing two on the remote will select the HDMI source

that is connected to HDMI input port two. Pressing button three on the remote will

select the HDMI source that is connected to HDMI input port three. Pressing four

on the remote will select the HDMI source that is connected to HDMI input port

four.

RS-232 Serial Control Interface

Please see page 7 for more information on the RS-232 serial control interface.

How to Connect the 4X2 Switcher For HDMI