Owner's Manual

CONNECTING AND OPERATING THE 3X1 SWITCHER FOR HDMI 1.3
How to Connect the 3X1 Switcher For HDMI to your devices
Connect the supplied cables from the HDMI sources into the 3X1 Switcher for HDMI’s 1.
input ports.
Connect the cable from your display (monitor or projector) into the HDMI output port of 2.
the 3X1 Switcher for HDMI.
Plug the 5VDC power supply into the 3X1 Switcher for HDMI.3.
4
OPERATING THE 3X1 SWITCHER FOR HDMI 1.3
Switching between the inputs on the 3X1 Switcher HDMI 1.3 is done using the
either the supplied RMT3-IR remote or the selector button located on the front
panel.
IR Remote Control
Pressing button one on the remote will select the HDMI source that is connected to
HDMI input port one. Pressing two on the remote will select the HDMI source that
is connected to HDMI input port two. Pressing three on the remote will select the
HDMI source that is connected to HDMI input three.
Selector Button
Pressing the selector button located on the front of the 3X1 Switcher for HDMI 1.3
will cycle through the three inputs.