Owner's Manual

CONNECTING THE 2X2 SWITCHER FOR HDMI

OPERATING THE 2X2 SWITCHER FOR HDMI

Connect the supplied cable from the HDTV HDMI source into the HDMI input 1.

port 1 of the 2X2 Switcher for HDMI.

Connect the second HDTV HDMI source to HDMI input port 2 on the 2X2 Switcher 2.

for HDMI using a user supplied HDMI cable.

Connect the display(s) to the HDMI output port(s)* of the 2X2 Switcher for 3.

HDMI using user supplied cable(s).

Optionally, connect an external audio processor to the 2X2 Switcher for HDMI 4.

using a user supplied digital optical cable.

Plug the 5V DC power supply into the 2X2 Switcher for HDMI.5.

NOTE: *Display information (EDID) is sent from the display connected to HDMI

Output Port 1 to both of the sources connected to the 2X2 Switcher for HDMI. If

there is no display connected to HDMI Output Port 1, the EDID from the display

connected to HDMI Output Port 2 will be used. The source will output resolutions

and timings according the EDID that is being fed by the 2X2 Switcher for HDMI.

Therefore, all of the connected displays must be capable of accepting the timings

and resolution output by the source. It is recommended that the display with the

lowest native resolution be connected to HDMI output port 1. This is to ensure that

a compatible video signal will be able to be displayed on all connected monitors.

Switching between the inputs on the 2X2 Switcher for HDMI is done using either

the supplied RMT2-IR remote or through the RS-232 serial control interface.

IR Remote Control

Pressing button one on the remote will select the HDMI source that is connected to

HDMI input port one. Pressing two on the remote will select the HDMI source that

is connected to HDMI input port two.

RS-232 Serial Control Interface

Please see page 7 for more information on the RS-232 serial control interface.

How to Connect the 2X2 Switcher For HDMI