Owner's Manual
CONNECTING AND OPERATING THE SUPER BOOSTER FOR HDMI
4
Connect the long HDMI cable from the source into the “HDMI In” on the front 1.
of the Super Booster For HDMI. The Super Booster For HDMI is placed next to
your display to regenerate the HDMI cable.
Connect a short HDMI cable from the “HDMI Out” connection in the back of the 2.
Super Booster For HDMI to your display or projector.
If there is no video signal or there is signal noise in the picture, adjust the EQ 3.
trim pot located on the front panel of the Super Booster For HDMI. Insert a
small at head device, such as a screw driver into the trim pot hole. Turn the
trim pot in millimeter increments in either a clockwise or counterclockwise
direction until the digital noise is tuned out and the image appears clear
NOTE: Source needs to supply 50 mA for maximum performance.
How to Connect the Super Booster For HDMI
Application Diagram
Multiple Super Booster For HDMI devices can be daisy chained together.
HDMI Cabl
Max Length: 200 ft.
Max Length: 200 ft.
Max Length: 200 ft.
e
HDMI Cable
HDMI Cable
HDMI Cabl
Source
Super Booster
For HDMI
Super Booster
For HDMI
Super Booster
For HDMI
Display
e
Max Length: 15 ft.
NOTE: Maximum of 3 when HDMI video cables are 100 feet or more. Maximum of
8 when HDMI cables are 60 feet or less. Use certied HDMI cables for maximum
performance.