Owner's Manual

CONNECTING THE 4X4 MATRIX FOR HDMI
OPERATING THE 4X4 MATRIX FOR HDMI
4
Connect the HDMI/DVI* sources (up to four) to the 4X4 Matrix For HDMI using the 1.
supplied HDMI cables.
Connect the HDMI/DVI* displays (up to four) to the 2. 4X4 Matrix For HDMI using user
supplied HDMI cables.
Plug the included 24V DC power supply into the 3. 4X4 Matrix For HDMI.
Power on the displays.4.
Power on the sources. When powering on each source, please ensure that it is sending 5.
video to a connected and powered on display.
*When used with a HDMI to DVI adapter
NOTE: Display information (EDID) is sent from the display connected to HDMI Output Port
1 to all sources connected to the 4X4 Matrix for HDMI. If a DVI display is connected to
HDMI Output Port 1, the remaining HDMI Output Ports will be scanned in succession for an
EDID from an HDMI display to use. If all displays connected to the 4X4 Matrix for HDMI are
DVI displays, the EDID from the DVI display connected to HDMI Output Port 1 is used.
The 4X4 Matrix For HDMI switching can be controlled by either the included RMT-16IR remote
control or by the RS-232 serial control interface on the rear of the unit.
IR Remote Control
The supplied RMT-16IR remote control has 16 buttons control which HDMI source is being
routed to the 4 display output ports. Please use the table below for the IR remote control table.
RMT-16IR
Button
HDMI Display
Output Port
Connects to
HDMI Input Port
1 1 1
2 1 2
3 1 3
4 1 4
5 2 1
6 2 2
7 2 3
8 2 4
9 3 1
10 3 2
11 3 3
12 3 4
13 4 1
14 4 2
15 4 3
16 4 4
RS-232 Serial Control
Please see page 7 for information
on using the RS-232 serial control
interface