User Guide
EP Series User Programming Guide 62
Optional
Feature
Client Management
Buttons
Client Management
Client Management allows the user to enable/disable, connect/disconnect, and update client Controllers associated to the
main Controller’s server database.
Client Management allows user to update the rmware of the clients. The rmware for an individual Controller may be
updated by clicking the Update Client button for the Controller. If multiple Controllers are connected to a main Controller, the
Update All will update all the clients.
» NOTE: It will take 2-5 minutes to update
each client. During that time the clients will
be off-line.
» NOTE: Gateway and DNS IP addresses
must be congured to access the Update
Server. Refer to IP Address to congure
these settings.
» WARNING: All Controllers in a system
MUST be using the same rmware version.
Managing Clients
1. The installed client(s) will be listed
in the Client Management section.
2. Use the Client Management buttons to manage the system clients.
Global Commands
Update All
• Updates all connected Clients
Data Sync
• Re-sends Server Database to all Clients
Client Specic Commands
Client Disconnect
• Disables a client in the Server Database
Client Connect
• Enables a client in the Server Database
Delete Client
• Permanently removes Client from Server Database
Update Client
• Updates the selected Client rmware to the latest version
Client Reboot
• Reboots selected Client