User Guide

EP Series User Programming Guide 22
Card Holder
Card Holders are individuals who access the facility and are entered in the system. Access credentials are assigned to Card
Holders. There are 3 main Card Holder functionalities that are required for the system to work properly.
Administration
1. Fill in your personal information.
2. Enter your First and Last name (required).
3. Enter your phone number (required).
4. Enter your email.
The Card
Card Enrollment must be completed for a card to be
used on the system. To activate a card:
1. Input Card number on data entry line. Or scan
card with reader.
2. Select Card Status as Active.
3. Select appropriate Card Type
4. Select Access Level type.
5. Click Save
Directory Code
1. Check the Directory Listed check box
2. Input a Directory Code into the data entry line.
» NOTE: Phone number eld must be populated for this feature
to work.
Entry Code
3. Input an Entry Code in the data entry line.
4. Click Save.
» NOTE: A valid access level is required for the name to
appear in the directory.