Quick Start Guide

ManualsBrandsLinear ManualsAudioEntryPro 7" Touch Screen, 36 Door Telephone Entry & Access

EP Unit Operation

Requesting Access with an Entry Code

• Residents have up to 40 seconds to key in their entry code.

• Up to eight seconds are allowed between each keystroke.

• All digits of the entry code must be entered. Example: If the entry

code length is set for four digits, and the code is 0042, the user

must enter “0 0 4 2”.

• If the wrong key is pressed, pressing the

key will reset the

keypad. The correct code can then be entered.

• After a correct code is entered, and if the conditions for granting

access are fullled, the programmed relay will activate for the

programmed time.

• If the number of incorrect codes entered exceeds the keypad

lockout count, the keypad will be locked and not accept any entries

for one minute. This is congurable within the front panel admin

settings.

• If the Anti-passback feature is enabled, the entry code will be

unusable until the anti-passback time expires.

Requesting Access with a Wireless Transmitter

• Activate a wireless transmitter within radio range of the unit’s

antenna.

• When the transmitter key is pressed, the decoded number is

processed like a traditional card or code.

• After a valid transmitter is decoded, and if the conditions for

granting access are fullled, the programmed relay channel will

activate for the programmed time.

• If the Anti-passback feature is enabled, the transmitter will be

unusable until the anti-passback time expires.

Requesting Access with a Visitor Call

• Navigate to Resident Directory using Navigation keys.

• Scroll through the alphabet to the rst letter of the last name.

• Press Enter.

• Scroll through name list to desired entry.

• Press Enter to call.

• If the visitor already knows the resident’s directory number, they

can enter the directory number to call the resident.

• The system dials the resident’s telephone number to establish

2-way communications.

NOTE: The resident’s telephone number will never be displayed to the visitor.

• If the resident is using the telephone at the same time a visitor

calls, the display will indicate to the visitor that the line is busy.

• The resident answers the call and converses with the visitor to

determine if access will be granted.

• The resident can use their telephone’s keypad to grant access

activating Relay Channel “A” by pressing

. After access is

granted, the system will disconnect the call.

• The resident can disconnect the visitor without granting access by

pressing

or by hanging up.

• The length of time the visitor is allowed to talk can be programmed

from 30-300 seconds.

ENTRY CODE AT LOCAL KEYPAD

AFTER

SCROLLING, ENTER

THE RESIDENT