Owner's Manual

ManualsBrandsLinear ManualsMisc ElectronicsLinear DMC1CD

dmc1CD

Installation Instructions

www.mssystems.com | 800.421.1587 | www.mssystems.com

Page

Important Safety

Instructions

READ ALL INSTRUCTIONS CAREFULLY BEFORE

INSTALLING OR USING THE DMC1 SYSTEM

THE dmc1CD MUST BE INSTALLED BY A M&S SYSTEMS DEALER

OR INSTALLERS, AND MUST CONFORM TO ALL LOCAL

BUILDING AND ELECTRICAL CODES.

Warning: always follow these safety instructions.

Retain these instructions for future system reference.

• Adhere to all warnings on the

dmc1CD and in these instructions.

Follow all operating and installation

instructions.

• CAUTION: These installation and

servicing instructions are for use by

qualified personnel only. To reduce

the risk of electric shock, do not

perform any servicing other than

that contained in the operating

instructions unless you are qualified

to do so.

116000B.pdf 1116000B.pdf 1 12/2/2005 2:37:35 PM12/2/2005 2:37:35 PM

Summary of content (4 pages)

PAGE 1
dmc1CD Installation Instructions Important Safety Instructions READ ALL INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR USING THE DMC1 SYSTEM THE dmc1CD MUST BE INSTALLED BY A M&S SYSTEMS DEALER OR INSTALLERS, AND MUST CONFORM TO ALL LOCAL BUILDING AND ELECTRICAL CODES. Warning: always follow these safety instructions. Retain these instructions for future system reference. • Adhere to all warnings on the dmc1CD and in these instructions. Follow all operating and installation instructions.
PAGE 2
dmc1CD Installation Instructions • DO NOT attempt to service the dmc1CD yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of shock to persons.
PAGE 3
dmc1CD Installation Instructions Installing the dmc1CD The finish out installation of the dmc1CD should be made after the application of wall covering material. These instructions should be used in conjunction with the dmc1 master unit’s finish out instructions. The dmc1CD should be installed prior to the finish out of the dmc1 master. Tools required: • #2 Phillips screwdriver Connect the audio cables to the audio outlets of the dmc1CD player.
PAGE 4
dmc1 M&S Systems 2-Year Warranty M&S Systems warrants its products to be free of defects for 2 years. Except for the AirVac Gold power units. The warranty period begins on either (a) the date of purchase or installation date of this product or (b) the date of closing on a new residence in which this product was originally installed. The warranty extends to the original user of the product and to each subsequent owner of the product during the term of the warranty.