x3 Component / Audio Distribution Amplifier Model # COMP-DA-1X3 USER MANUAL www.linearcorp.
ASKING FOR ASSISTANCE Technical Support: Telephone (800) 421-1587 (760) 438-7000 Fax (760) 438-7199 Technical Support Hours: 6:30 AM - 4:30 PM PST Monday through Friday. Email: techsupport@linearcorp.com Website: www.linearcorp.com Notice Linear LLC reserves the right to make changes in the hardware, packaging and any accompanying documentation without prior written notice.
TABLE OF CONTENTS 1. Introduction 2. Features 3. Panel Descriptions 4. Connecting and Operating the 1x3 Component / Audio Distribution Amplifier (DA) and Application Diagram 5. Wiring Diagram 6. Specifications 7.
INTRODUCTION The Linear 1:3 Component With Audio Distribution Amplifier is the perfect solution for anyone who needs to send one source of high definition component video and analog or digital audio to multiple displays at the same time. It supports all component equipment, such as DVD players and satellite set top boxes and all component displays. In operation, the component video source is connected to the distribution amplifier at the input. Three outputs are available to be used in part or in full.
FEATURES Features • Connects up to three component displays at the same time to one video source • Supports HDTV (Component, YPbPr, RGsB) and SD (Composite, YCbCr) input signals • Supports HDTV resolutions up to 1080p • Both analog and digital audio outputs are active Includes: (1) 1x3 Component / Audio DA (1) 6ft Component cable (1) 5V DC Power Supply (1) Users Manual 2
PANEL DESCRIPTIONS Analog Audio Digital Audio Analog Audio Digital Audio Out 3 Out 2 Out 4 Out 2 Component Out 2 Analog Audio Digital Audio Out 1 Out 1 Component Out 1 Component Out 3 Analog Audio Digital Audio Input Input Component Input 5V DC Power Input Power LED 3
CONNECTING AND OPERATING THE 1x3 COMPONENT / AUDIO DA How to Connect the 1x3 Component / Audio DA to your devices 1. Connect the supplied Component cable from the source into the 1x3 Component / Audio DA’s input port. 2. Connect either a SPDIF digital audio or RCA analog right and left audio cable into the 1x3 Component / Audio DA’s audio input port. 3. Connect the Component and audio cables from your display(s) (up to 3) into the Component and audio out slots on the 1x3 Component / Audio DA. 4.
Component cable maximum distance is 50 feet at 1080p resolution without a COMP-CAT5-EXT WIRING DIAGRAM 5
SPECIFICATIONS Input ........ YPbPr x1 or RGsB x1 (or RGBHV), or Composite x 1 (1 Vp-p@ 75 Ohm) Output .......................................... YPbPr x3, or RGsB(or RGBHV), or Composite x 3 Audio input ................................................................................... Digital (SPDIF) x1 + R/L x1 Audio output ................................................................................. Digital (SPDIF) x3 + R/L x3 Analog audio input/output ...............................................
WARRANTY Note: These products are designed to be installed and serviced by trained professional installation companies. Linear LLC warrants this product to be free from defects in material and workmanship. For the term of the warranty, see the list of products below. The Warranty Expiration Date is reflected by a date code that is affixed to all of Linear’s products. This warranty extends only to wholesale customers who buy direct from Linear or through Linear’s normal distribution channels.
CO M P-D A-1X 3 R ev A
