Owner's Manual

BioRead 1000 Series
Installation Manual
Using as a Stand Alone device (model BR-1000)
The BioRead™ fingerprint reader can be used as a stand-alone device when used
with the BioRead Door Controller.
If the BioRead is being used as a stand alone device dipswitch 1 at the rear of the
unit must be set to ON. Dipswitches 2-4 must be set to OFF.
See the illustration below.
p/n 6035000 rev 2.0 Page 3 of 22
BioRead™ fingerprint reader
(rear view)
Dipswitch 1 must be set
to ON when BioRead™ is
used with the BioRead
Door Controller.
Dipswitches 2-4 are set
to OFF