Owner's Manual

BioRead 1000 Series
Installation Manual
Using as a 26-bit Wiegand front-end reader (model BR-1100)
n be used as the front-end
reader for an IEI HubMaxII, Hub MinimaxII, eMerge system or
iegand front-end reader for another access control system.
the unit must be set to OFF.
The BioRead™ fingerprint reader ca
as 26-bit W
If the BioRead is being used as a front-end reader
all four dipswitches at the rear of
See the illustration below.
p/n 6035000 rev 2.0 Page 11 of 22
BioRead™ fingerprint reader
(rear view)
A
ll four dipswitches are
set to OFF when
BioRead™ is used as a 26
-
bit Wiegand front-end
reader