Owner's Manual

REMOTE DEVICE WIRING REQUIREMENTS

Cable Type

Each remote device requires a 6-wire connection to the AM/II.

Depending on the distance of the cable run, two different types

of cable are recommended.

✶ For cable distance up to 300 feet, use BELDEN 9931

(24 AWG).

✶ For cable distance up to 500 feet, use WEICO 9405

(20 AWG).

Load Number

Each hardwired remote accessory device has been assigned

a “load number”. Homerun wiring is recommended for

accessories, although multiple accessories can be wired on the

same cable run if the following formulas are used.

✶ For cable distance up to 300 feet:

CABLE RUN IN FEET x LOAD UNITS = 3,000 OR LESS

✶ For cable distance up to 500 feet:

CABLE RUN IN FEET x LOAD UNITS = 10,000 OR LESS

REMOTE DEVICE LOAD NUMBER

AM-KP 9

AM-RRR 4

AM-CRI 25

AM-RPR 4