Owner's Manual

4
Accessory Overview
PBUS Accessories
Several compatible accessories are available to connect to the AM-3’s two 6-wire
communications “PBUS” inputs. Up to six PBUS accessories can be used with
each AM-3 unit.
AM-RRR Remote Radio Receiver
For wireless transmitters, connect the Model AM-
RRR high-gain superheterodyne UHF receiver. The
receiver is housed in a weather-resistant enclosure
and can be mounted indoors or outdoors. Gaskets
and a weather-tight wiring strain relief seal the unit
from the elements.
AM-RPR Remote Proximity Receiver
The Model AM-RPR functions as a remote device
that supplies localized radio reception for the AM-3
In a typical installation, the AM-RPR would be
mounted in a plastic single-gang electrical box next
to the controlled opening. When the user requires
access, their transmitter must be activated within
three inches of the AM-RPR faceplate.
AM-KP Exterior Keypad
The Model AM-KP is housed in a rugged cast
aluminum enclosure designed for exterior
installations. The die-cast keys have bright,
easy-to-read yellow graphics. The keypad can
be mounted to a pedestal or directly to a wall.
A keylock secures the keypad to the mounting
backplate.
AM-KPI Interior Keypad
The Model AM-KPI keypad is housed in a rugged,
plastic enclosure designed to be mounted indoors
in a standard single-gang electrical box. Tamper
resistant screws secure the keypad to its mounting
plate. The die-cast keys have bright, easy-to-read
yellow graphics and is illuminated with white
LEDs.The keypad is supplied with a satin-chrome
bezel and three interchangeable colored bezels
(white, ivory, & bronze) to customize the keypad
appearance for the installation.
AM-CRI Card Reader Interface
The Model AM-CRI expands the standard two
AM-3 Wiegand inputs by supporting one or two
additional 26-bit Wiegand input devices per
AM-CRI interfaces used. Each AM-CRI connects to
the AM-3’s PBUS inputs.
Wiegand Accessories
Two Linear accessories are available to connect WIEGAND format devices to the
AM-3. Most other manufacturer’s 26, 30 & 31-bit WIEGAND output devices can
also be used with the AM-3.
WOR Wiegand Output Radio Receiver
For block-coded Linear wireless transmitters,
connect the Model WOR high-gain superheterodyne
UHF receiver. The receiver is housed in a weather-
resistant enclosure and can be mounted indoors or
outdoors. Gaskets and a weather-tight wiring strain
relief seal the unit from the elements.
AM-PR Proximity Reader
The Model AM-PR is a radio-based reader that
works with either proximity tags (Model AM-PT)
or proximity cards (Model AM-PC), both of which
are slotted to attach to key rings. Upon reading a
user’s tag or card, it transmits the entry data via
a Wiegand output to the AM-3. An integral LED
confi rms to the user that access is granted.
217977 A IMAGE 4
AM-RRR
*
5
6
7
8
9
0
#
1
2
3
4
AM-KP
AM-KPI
AM-RPR
AM-PR
AM-CRI
*
AM-RRR
REMOTE
RADIO
RECEIVER
AM-RPR
RADIO
PROXIMITY
RECEIVER
AM-KP
EXTERIOR
KEYPAD
AM-KPI
INTERIOR
KEYPAD
AM-CRI
CARD
READER
INTERFACE
AM-PR
PROXIMITY
READER
PBUS
ASSESSORIES
WIEGAND
ASSESSORIES
AM-3
ACCESS CONTROLLER
WOR
WIEGAND
OUTPUT
RECEIVER
WOR