Data Sheet

Specificaons, features, warranty, and availability subject to change without noce.
PRICING
Contact your 2GIG Distributor or Sales Representative
for pricing details.
PRODUCT AVAILABILITY, ORDERING,
AND SHIPPING INFORMATION
WARRANTY
We are pleased to announce the availability of the Hardwire Conversion Kit (2GIG-TAKE-KIT1), which
provides installers with an easy way to take over pre-wired security alarm systems to convert exisng
hardwired zones to wireless zones.
The Hardwire Conversion Kit includes the patented 2GIG Super Switch Takeover Module (Wireless
Takeover of an Alarm System. US Patent No. 8,638,218), a UL 94: V-O rated plasc enclosure, and a 12/24
VDC Power Supply Board with backup baery charging circuit. The kit is also designed to allow you to add
up to two (2) addional Super Switch Takeover Modules, giving you the capaibility to convert up to 24
pre-wired zones to wireless zones.
Hardwire Conversion Kit
10002617 Rev. A
For sales questions call 855-2GIG-TECH or email us at [e-mail].
For all product announcements, datasheets, technical information, etc., please visit the 2GIG dealer site
at dealer.2gig.com or email us at [e-mail].
For technical support in the USA and Canada: 855-2GIG-TECH (855-244-4832)
For technical support outside of the USA and Canada, contact your regional distributor.
SKU: 2GIG-TAKE-KIT1
UPC: 8-17082-01103-5
Orders for the new SKU will be accepted starting on
September 30, 2014. The estimated first shipping date is
October 30, 2014. Dealers should check with distributors
for availability.
The new SKU ships with a standard one (1) year limited
warranty. Refer to the Installation Instructions for
specific warranty details.
REQUIREMENTS
• Go!Control Panel
• A 12 V, 1.4 AH Rechargeable Sealed Led Acid
Battery (or better)
Copyright © 2014 Linear LLC.
SPECIFICATIONS
• Enclosure: ABS Plastic UL 94: V-O
• Wireless Signal Range: 350 ft, open air, with Wire-
less Go!Control Panel
• Transmitter Frequency: 345.00 MHz (crystal
controlled)
• Power Supply Board: 16.5VAC, 20VA input, 12/24
VDC Output with built-in charger for sealed led or gel
type batteries
• Plug-In Transformer: 120VAC 60Hz with 3 mode
surge protection
• Operating Temperature: 32° F to 120.2° F, (0° C to
+49° C)
• Relative Humidity: 5-95% Non-Condensing
• Operating Voltage: 9-16 VDC, 50mA
FEATURES
• Super Switch Takeover Module (2GIG-TAKE-345)
• ABS Plastic Wall-Mount Enclosure (UL 94: V-O)
• Power Supply Board with Backup Battery Charging
Unit
• Grounded Plug-in Transformer with Surge Protection
• House up to two (2) additional Super Switch Takeover
Modules (2GIG-TAKE-345) to convert up to 24
pre-wired zones to wireless zones.
• Compatible with the Linear H208 Lock Kit for
additional enclosure security
ADD-ON OPTIONS