Spec Sheet

WiFi Cameras
Requirements:
• SmartLink+ App requires smartphones supporting iOS 10 (or later) & Android Kit Kat 4.4 (or later) and
subscription plan with SecureNet Technologies.
• Camera requires 120VAC outlet.
• Camera requires WiFi (802.11b/g/n) 2.4Ghz or direct connect Ethernet to router/switch.
Ordering Information:
2GIG-CAM-101-NET 2GIG Indoor WiFi Camera, Powered by SecureNet
2GIG-CAM-111-NET 2GIG Indoor WiFi Pan/Tilt Camera, Powered by SecureNet
2GIG-CAM-131-NET 2GIG Indoor/Outdoor WiFi Bullet Camera, Powered by SecureNet
2GIG-CAM-101-NET
2GIG Indoor WiFi Camera
2GIG-CAM-111-NET
2GIG Indoor Wi Fi Pan/Tilt Camera
2GIG-CAM-131-NET
2GIG Indoor/Outdoor WiFi
Bullet Camera
Video Resolution
Compression
Night Vision
IR-Cut Filter
Camera Sensor
Lens
Viewing Angle
Frame Rate
Pan/Tilt
Audio
WiFi Connectivity
Wired Connectivity
Setup
Motion Detection
Video Storage
Power Input
Shipping Dimensions
Shipping Weight
Temperature
Regulatory
SmartPhone App
Works With:
720p(1280x720,640x360,320x180)
H.264 & MJPEG (32kbps -2Mbps)
4 IR LEDs 12 IR LEDs 24 IR LEDs
15 FT Range 24 FT Range 60 FT Range
Yes Yes Yes
1/4" CMOS, 1 Mega Pixel
f = 3.6mm, F = 2.0
Horizontal: 60°
1 to 30 FPS
Horizontal: 350°
No Vertical No
Two-Way Two-Way No
802.11 b/g/n (2.4Ghz)
10/100 Mbps RJ45 Ethernet
WPS, Wired
Yes Yes Yes
MicroSD (Not included) MicroSD (Not included) 64GB Micro SD (Included)
5V DC, <4W 5V DC, <6W SVDC, <SW
Operating:-10c - SOC (10- 90% Humidity)
Storage: -40 - 70 (3 - 90% Humidity)
FCC, RoHS
SmartLink+ (iOS & Android)
2GIG GC2 and RELY Systems, powered by SecureNet