Quick Start Manual
INSTALLATION DOORS AND GATES
Doors and Gates must be equipped
with entrapment protection devices to
avoid danger of injury to persons.
Before installation of such devices, the
installer has to identify all danger
zones of the door or gate.
Install non-contact sensor in the door
opening not higher than 6 in. from the
ground
OR
Install contact sensors on the leading
edge of the door
Doors
Gates
Install non-contact sensor in the gate
opening not higher than 27 1/2 in.
from the ground
OR
Install contact sensor on the leading
edge of the gate and all other
identified pinch-points
D
o
or Open
ing
G
ate Op
e
n
i
n
g
Leading Edge
Pinch-Points
Leading
Edge
Page 4/4
Issue Date: 21-June-2010