Owner's Manual

dish-to-receiver connection

Model 1111

For Single Pane Glass

(for dual pane use model 1112)

multiplex

technology, inc.

3001 Enterprise St., Brea, CA 92821-6213. U.S.A.

* * Fax 714-996-4900714-996-4100 800-999-5225

Glass

U.S. and international patents pending.

Glass

PAGE 1
Glass TM dish-to-receiver connection Model 1111 For Single Pane Glass (for dual pane use model 1112) Glass TM U.S. and international patents pending. multiplex R technology, inc. 3001 Enterprise St., Brea, CA 92821-6213. U.S.A.
PAGE 2
GlassLink™ Installation Part TWO: installation of INSIDE GlassLink™ Part ONE: installation of OUTSIDE GlassLink™ 1. Using the instructions included with your satellite system, install the dish and locate the satellite receiver in the house. 2. Identify a convenient window, through which the signals from the dish can be routed to the receiver. Usually the GlassLink™ will be located in a lower corner out of sight, but it can be located anywhere on the glass.
PAGE 3
Specifications Bandwidth from dish to receiver 950 MHz to 1.45 GHz Voltage range from receiver to dish +10.5 VDC to + 21.0 VDC LNB current range 130 mA to 200 mA Operating temperature range -40º F to + 122º F Single pane window thickness range 0.085 to 0.101 inch (A.S.T.M. single strength) (For dual pane glass, use Model 1112) ! WARNING: To prevent electrical shock, do not attempt to service unit. No user-serviceable parts inside. Warranty Multiplex Technology, Inc.