Datasheet

LTC6430-15
5
643015f
The l denotes the specifications which apply over the full operating
temperature range, otherwise specifications are at T
A
= 25°C, V
CC
= 5V, Z
SOURCE
= Z
LOAD
= 100Ω, unless otherwise noted (Note 3).
Measurements are performed using Test Circuit A, measuring from 50Ω SMA to 50Ω SMA without de-embedding (Note 4).
SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS
OIP3 Output Third-Order Intercept Point P
OUT
= 2dBm/Tone, Δf = 1MHz, Z
O
= 100Ω A-Grade
B-Grade
45.3
44.3
dBm
dBm
IM3 Third-Order Intermodulation P
OUT
= 2dBm/Tone, Δf = 1MHz, Z
O
= 100Ω A-Grade
B-Grade
–86.6
–84.6
dBc
dBc
HD2 Second Harmonic Distortion P
OUT
= 8dBm –71.4 dBc
HD3 Third Harmonic Distortion P
OUT
= 8dBm –79.5 dBc
P1dB Output 1dB Compression Point 23.0 dBm
NF Noise Figure De-Embedded to Package for Balun Input Loss 3.8 dB
Frequency = 800MHz
S21 Differential Power Gain De-Embedded to Package 14.8 dB
OIP3 Output Third-Order Intercept Point P
OUT
= 2dBm/Tone, Δf = 1MHz, Z
O
= 100Ω A-Grade
B-Grade
44.5
43.5
dBm
dBm
IM3 Third-Order Intermodulation P
OUT
= 2dBm/Tone, Δf = 1MHz, Z
O
= 100Ω A-Grade
B-Grade
–85.0
–83.0
dBc
dBc
HD2 Second Harmonic Distortion P
OUT
= 8dBm –71.2 dBc
HD3 Third Harmonic Distortion P
OUT
= 8dBm –76.7 dBc
P1dB Output 1dB Compression Point 22.6 dBm
NF Noise Figure De-Embedded to Package for Balun Input Loss 4.0 dB
Frequency = 900MHz
S21 Differential Power Gain De-Embedded to Package 14.8 dB
OIP3 Output Third-Order Intercept Point P
OUT
= 2dBm/Tone, Δf = 1MHz, Z
O
= 100Ω A-Grade
B-Grade
43.7
42.7
dBm
dBm
IM3 Third-Order Intermodulation P
OUT
= 2dBm/Tone, Δf = 1MHz, Z
O
= 100Ω A-Grade
B-Grade
–83.4
–81.4
dBc
dBc
HD2 Second Harmonic Distortion P
OUT
= 8dBm –71.7 dBc
HD3 Third Harmonic Distortion P
OUT
= 8dBm –76.5 dBc
P1dB Output 1dB Compression Point 22.3 dBm
NF Noise Figure De-Embedded to Package for Balun Input Loss 4.2 dB
Frequency = 1000MHz
S21 Differential Power Gain De-Embedded to Package 14.7 dB
OIP3 Output Third-Order Intercept Point P
OUT
= 2dBm/Tone, Δf = 1MHz, Z
O
= 100Ω A-Grade
B-Grade
43.5
42.5
dBm
dBm
IM3 Third-Order Intermodulation P
OUT
= 2dBm/Tone, Δf = 1MHz, Z
O
= 100Ω A-Grade
B-Grade
–83.0
–81.0
dBc
dBc
HD2 Second Harmonic Distortion P
OUT
= 8dBm –74.2 dBc
HD3 Third Harmonic Distortion P
OUT
= 8dBm –86.0 dBc
P1dB Output 1dB Compression Point 22.3 dBm
NF Noise Figure De-Embedded to Package for Balun Input Loss 4.2 dB
ac elecTrical characTerisTics
Note 1: Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to any Absolute
Maximum Rating condition for extended periods may affect device
reliability and lifetime.
Note 2: Guaranteed by design and characterization. This parameter is not tested.
Note 3: The LTC6430-15 is guaranteed functional over the case operating
temperature range of –40°C to 85°C.
Note 4: Small signal parameters S and noise are de-embedded to the
package pins, while large signal parameters are measured directly from the
test circuit.