Datasheet

LTC6102
LTC6102-1/LTC6102HV
6
6102fd
Note 1: Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to any Absolute
Maximum Rating condition for extended periods may affect device
reliability and lifetime. In addition to the Absolute Maximum Ratings, the
output current of the LTC6102 must be limited to ensure that the power
dissipation in the LTC6102 does not allow the die temperature to exceed
150°C. See the Applications Information “Output Current Limitations Due
to Power Dissipation” for further information.
Note 2: The LTC6102C/LTC6102C-1/LTC6102HVC are guaranteed to meet
specifi ed performance from 0°C to 70°C. The LTC6102C/LTC6102C-1/
LTC6102HVC are designed, characterized and expected to meet specifi ed
performance from –40°C to 85°C but are not tested or QA sampled at
these temperatures. LTC6102I/LTC6102I-1/LTC6102HVI are guaranteed
to meet specifi ed performance from –40°C to 85°C. The LTC6102H/
LTC6102H-1/LTC6102HVH are guaranteed to meet specifi ed performance
from –40°C to 125°C.
Note 3: These Parameters are guaranteed by design and are not 100%
tested. Thermocouple effects preclude measurements of these voltage
levels during automated testing.
Note 4: Limits are fully tested. Limit is determined by high speed
automated test capability.
Note 5: I
B
specifi cation is limited by practical automated test resolution.
Please refer to the Typical Performance Characteristics section for
more information regarding actual typical performance. For tighter
specifi cations, please contact LTC Marketing.
(LTC6102HV) The l denotes the specifi cations which apply over the full
operating temperature range, otherwise specifi cations are at T
A
= 25°C. R
IN
= 10Ω, R
OUT
= 10k, V
SENSE
+
= V
+
(see Figure 1 for details),
V
+
= 12V, V
–
= 0V unless otherwise noted.
ELECTRICAL CHARACTERISTICS
SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS
I
S
Supply Current V
+
= 5V, I
OUT
= 0, R
IN
= 10k, R
OUT
= 100k
l
275 400
475
μA
μA
V
+
= 6V, I
OUT
= 0, R
IN
= 10k, R
OUT
= 100k
l
280 425
500
μA
μA
V
+
= 12V, I
OUT
= 0, R
IN
= 10k, R
OUT
= 100k
l
290 450
525
μA
μA
V
+
= 100V, I
OUT
= 0, R
IN
= 10k, R
OUT
= 100k 420 575 μA
LTC6102HVC, LTC6102HVI
l
650 μA
LTC6102HVH
l
675 μA
f
S
Sampling Frequency 10 kHz