Datasheet

12
LTC4414
4414fc
PART NUMBER DESCRIPTION COMMENTS
LTC1473 Dual PowerPath Switch Driver Switches and Isolates Sources Up to 30V
LTC1479 PowerPath Controller for Dual Battery Systems Complete PowerPath Management for Two Batteries; DC Power Source,
Charger and Backup
LTC1558/LTC1559 Back-Up Battery Controller with Programmable Output Adjustable Backup Voltage from 1.2V NiCd Button Cell,
Includes Boost Converter
LT
®
1579 300mA Dual Input Smart Battery Back-Up Regulator Maintains Output Regulation with Dual Inputs, 0.4V Dropout at 300mA
LTC1733/LTC1734 Monolithic Linear Li-Ion Chargers Thermal Regulation, No External MOSFET/Sense Resistor
LTC1998 2.5µA, 1% Accurate Programmable Battery Detector Adjustable Trip Voltage/Hysteresis, ThinSOT
LTC4055 USB Power Controller and Li-Ion Linear Charger Automatic Battery Switchover, Thermal Regulation, Accepts Wall Adapter
and USB Power, 4mm × 4mm QFN
LTC4354 Negative Voltage Diode-OR Controller and Monitor Replaces Power Schottky Diodes; 80V Operation
LTC4410 USB Power Manager in ThinSOT
TM
Enables Simultaneous Battery Charging and
Operation of USB Component Peripheral Devices
LTC4411 SOT-23 Ideal Diode 2.6A Forward Current, 28mV Regulated Forward Voltage
LTC4412HV 36V, Low Loss PowerPath Controller in MSOP –40°C to –125°C Operation; Automatic Switch Between DC Sources
LTC4413 Dual 2.6A, 2.5V to 5.5V Ideal Diodes in 3mm × 3mm 100mΩ ON Resistance, 1µA Reverse Leakage Current, 28mV Regulated
DFN Forward Voltage
Linear Technology Corporation
1630 McCarthy Blvd., Milpitas, CA 95035-7417
[phone]
●
FAX: [phone]
●
www.linear.com
© LINEAR TECHNOLOGY CORPORATION 2005
LT/LWI 0806 REV C • PRINTED IN USA
RELATED PARTS
U
PACKAGE DESCRIPTIO
MSOP (MS8) 0204
0.53 ± 0.152
(.021 ± .006)
SEATING
PLANE
NOTE:
1. DIMENSIONS IN MILLIMETER/(INCH)
2. DRAWING NOT TO SCALE
3. DIMENSION DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS.
MOLD FLASH, PROTRUSIONS OR GATE BURRS SHALL NOT EXCEED 0.152mm (.006") PER SIDE
4. DIMENSION DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSIONS.
INTERLEAD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.152mm (.006") PER SIDE
5. LEAD COPLANARITY (BOTTOM OF LEADS AFTER FORMING) SHALL BE 0.102mm (.004") MAX
0.18
(.007)
0.254
(.010)
1.10
(.043)
MAX
0.22 – 0.38
(.009 – .015)
TYP
0.127 ± 0.076
(.005 ± .003)
0.86
(.034)
REF
0.65
(.0256)
BSC
0
° – 6° TYP
DETAIL “A”
DETAIL “A”
GAUGE PLANE
12
3
4
4.90 ± 0.152
(.193 ± .006)
8
7
6
5
3.00 ± 0.102
(.118 ± .004)
(NOTE 3)
3.00 ± 0.102
(.118 ± .004)
(NOTE 4)
0.52
(.0205)
REF
5.23
(.206)
MIN
3.20 – 3.45
(.126 – .136)
0.889 ± 0.127
(.035
± .005)
RECOMMENDED SOLDER PAD LAYOUT
0.42
± 0.038
(.0165
± .0015)
TYP
0.65
(.0256)
BSC
MS8 Package
8-Lead Plastic MSOP
(Reference LTC DWG # 05-08-1660)