Datasheet

12
LTC4412
4412fa
PART NUMBER DESCRIPTION COMMENTS
LTC1473 Dual PowerPath Switch Driver Switches and Isolates Sources Up to 30V
LTC1479 PowerPath Controller for Dual Battery Systems Complete PowerPath Management for Two Batteries; DC Power Source,
Charger and Backup
LTC1558/LTC1559 Back-Up Battery Controller with Programmable Output Adjustable Backup Voltage from 1.2V NiCd Button Cell,
Includes Boost Converter
LT
®
1579 300mA Dual Input Smart Battery Back-Up Regulator Maintains Output Regulation with Dual Inputs, 0.4V Dropout at 300mA
LTC1733/LTC1734 Monolithic Linear Li-Ion Chargers Thermal Regulation, No External MOSFET/Sense Resistor
LTC1960 Dual Battery Charger Selector with SPI Complete Dual Battery Charger/Selector System, 36-Lead SSOP
LTC1998 2.5μA, 1% Accurate Programmable Battery Detector Adjustable Trip Voltage/Hysteresis, ThinSOT
LTC4350 Hot Swappable Load Share Controller Allows N + 1 Redundant Supply, Equally Loads Multiple Power Supplies
Connected in Parallel
LTC4410 USB Power Manager in ThinSOT Enables Simultaneous Battery Charging and
Operation of USB Component Peripheral Devices
Linear Technology Corporation
1630 McCarthy Blvd., Milpitas, CA 95035-7417
[phone]
●
FAX: [phone]
●
www.linear.com
© LINEAR TECHNOLOGY CORPORATION 2002
LT 0607 • PRINTED IN USA
RELATED PARTS
U
PACKAGE DESCRIPTIO
S6 Package
6-Lead Plastic TSOT-23
(Reference LTC DWG # 05-08-1636)
1.50 – 1.75
(NOTE 4)
2.80 BSC
0.30 – 0.45
6 PLCS (NOTE 3)
DATUM ‘A’
0.09 – 0.20
(NOTE 3)
S6 TSOT-23 0302 REV B
2.90 BSC
(NOTE 4)
0.95 BSC
1.90 BSC
0.80 – 0.90
1.00 MAX
0.01 – 0.10
0.20 BSC
0.30 – 0.50 REF
PIN ONE ID
NOTE:
1. DIMENSIONS ARE IN MILLIMETERS
2. DRAWING NOT TO SCALE
3. DIMENSIONS ARE INCLUSIVE OF PLATING
4. DIMENSIONS ARE EXCLUSIVE OF MOLD FLASH AND METAL BURR
5. MOLD FLASH SHALL NOT EXCEED 0.254mm
6. JEDEC PACKAGE REFERENCE IS MO-193
3.85 MAX
0.62
MAX
0.95
REF
RECOMMENDED SOLDER PAD LAYOUT
PER IPC CALCULATOR
1.4 MIN
2.62 REF
1.22 REF