Datasheet

LTC3883/LTC3883-1
105
3883fa
For more information www.linear.com/LTC3883
Writing 0x2B followed by 0xD5 sets the PEC, resets the EEPROM address pointer and unlocks the part for EEPROM
erase and data command writes.
Writing 0x2B followed by 0x91 and 0xE4 clears PEC, resets the EEPROM address pointer and unlocks the part for
EEPROM data reads of all locations.
Writing 0x2B followed by 0x91 and 0xE5 sets PEC, resets the EEPROM address pointer and unlocks the part for
EEPROM data reads of all locations.
MFR
_EE_ERASE
A
single write after the appropriate unlock key erases the EEPROM allowing subsequent data writes. This command
may be read to indicate if an EEPROM access is in progress.
A value of 0x2B will erase the EEPROM. If the part is busy writing or erasing the EEPROM a non-zero value will be
returned.
MFR_EE_DATA
Sequential writes or reads perform block loads or restores from the EEPROM. Successive MFR_EE_DATA word writes
will enter the EEPROM until it is full. Extra writes will lock the part. The first write is to the lowest address. The first
read returns the 16 bit EEPROM packing revision ID. The second read returns the number of 16 bit words available.
Subsequent reads return
EEPROM data starting with the lowest address.
PMBus COMMAND DETAILS