Datasheet

LTC3859A
12
3859af
pin FuncTions
TRACK/SS1, TRACK/SS2, SS3 (Pins 34, 16, 3/Pins 38,
20, 7): External Tracking and Soft-Start Input. For the buck
channels, the LTC3859A regulates the V
FB1,2
voltage to the
smaller of 0.8V, or the voltage on the TRACK/SS1,2 pin.
For the boost channel, the LTC3859A regulates the V
FB3
voltage to the smaller of 1.2V, or the voltage on the SS3
pin. An internal 1µA pull-up current source is connected
to this pin. A capacitor to ground at this pin sets the ramp
time to final regulated output voltage. Alternatively, a re-
sistor divider on another voltage supply connected to the
TRACK/SS pins of the buck channels allow the LTC3859A
buck outputs to track the other supply during start-up.
I
TH1
, I
TH2
, I
TH3
(Pins 35, 15, 7/Pins 1, 19, 11): Error
Amplifier Outputs and Switching Regulator Compensation
Points. Each associated channel’s current comparator trip
point increases with this control voltage.
V
FB1
, V
FB2
, V
FB3
(Pins 36, 14, 6/Pins 2, 18, 10): Receives
the remotely sensed feedback voltage for each controller
from an external resistive divider across the output.
SENSE1
+
, SENSE2
+
, SENSE3
+
(Pins 37, 13, 4/Pins 3, 17, 8):
The (+) Input to the Differential Current Comparators.
The I
TH
pin voltage and controlled offsets between the
SENSE
and SENSE
+
pins in conjunction with R
SENSE
set the
current trip threshold. For the boost channel, the SENSE3
+
pin supplies current to the current comparator.
SENSE1
, SENSE2
, SENSE3
(Pins 38, 12, 5/Pins 4,
16, 9): The (–) Input to the Differential Current Compara-
tors. When SENSE1,2
for the buck channels is greater
than INTV
CC
, then SENSE1,2
pin supplies current to the
current comparator.
PGND (Exposed Pad Pin 39): Driver Power Ground. Con-
nects to the sources of bottom N-channel MOSFETs and the
(–) terminal(s) of C
IN
. The exposed pad must be soldered
to the PCB for rated electrical and thermal performance.
(QFN/TSSOP)