Datasheet

LTC3544B
7
3544bfb
pin FuncTions
V
FB200B
(Pin 1): 200mA Regulator B Feedback Pin. This
pin receives the feedback voltage from an external resistive
divider across the output.
V
FB200A
(Pin 2): 200mA Regulator A Feedback Pin. This
pin receives the feedback voltage from an external resistive
divider across the output.
RUN200A (Pin 3): 200mA Regulator A Enable Pin. Forcing
this pin to V
IN
enables the 200mA regulator (channel A),
while forcing it to GND causes the regulator to shut off.
SW200B (Pin 4): Switch Node Connection to Inductor for
200mA Regulator B. This pin connects to the drains of the
internal power MOSFET switches.
SW200A (Pin 5): Switch node Connection to Inductor for
200mA Regulator A. This pin connects to the drains of the
internal power MOSFET switches.
PGND (Pin 6): Power Path Return Pin for Both 200mA
Regulators and the 300mA Regulator.
PV
IN
(Pin 7): Power Path Supply Pin for Both 200mA
Regulators and the 300mA Regulator. This pin must
be closely decoupled to PGND, with a 4.7µF or greater
ceramic capacitor.
SW300 (Pin 8): Switch Node Connection to Inductor for
300mA Regulator. This pin connects to the drains of the
internal power MOSFET switches.
RUN300 (Pin 9): 300mA Regulator Enable Pin. Forcing
this pin to V
IN
enables the 300mA regulator, while forcing
it to GND causes the regulator to shut off.
V
FB300
(Pin 10): 300mA Regulator Feedback Pin. This pin
receives the feedback voltage from an external resistive
divider across the output.
V
FB100
(Pin 11): 100mA Regulator Feedback Pin. This pin
receives the feedback voltage from an external resistive
divider across the output.
RUN100 (Pin 12): 100mA Regulator Enable Pin. Forcing
this pin to V
IN
enables the 100mA regulator, while forcing
it to GND causes the 100mA regulator to shut off.
SW100 (Pin 13): Switch Node Connection to Inductor for
100mA Regulator. This pin connects to the drains of the
internal power MOSFET switches.
GNDA (Pin 14, Exposed Pad Pin 17): Ground Pin for In-
ternal Reference, Control Circuitry, and the Current Path
Return for 100mA Regulator. The exposed pad must be
soldered to PCB ground for electrical connection and rated
thermal performance.
V
CC
(Pin 15): Supply Pin for Internal Reference and Control
Circuitry. Power path supply pin for the 100mA regulator.
RUN200B (Pin 16): 200mA Regulator B Enable Pin. Forcing
this pin to V
IN
enables the 200mA regulator (channel B),
while forcing it to GND causes the regulator to shut off.