Datasheet

LTC2990
4
Rev. F
For more information www.analog.com
Note 1: Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to any Absolute
Maximum Rating condition for extended periods may affect device
reliability and lifetime.
Note 2: Guaranteed by design and not subject to test.
Note 3: Integral nonlinearity is defined as the deviation of a code from a
straight line passing through the actual endpoints of the transfer curve.
The deviation is measured from the center of the quantization band.
Note 4: Trimmed to an ideality factor of 1.004 at 25°C. Remote diode
temperature drift (TUE) verified at diode voltages corresponding to
the temperature extremes with the LTC2990 at 25°C. Remote diode
temperature drift (TUE) guaranteed by characterization over the LTC2990
operating temperature range.
SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS
t
SU,STA(MIN)
Minimum Repeated Start Condition Set-Up
Time
600 ns
t
SU,STO(MIN)
Minimum Stop Condition Set-Up Time 600 ns
t
HD,DATI(MIN)
Minimum Data Hold Time Input 0 ns
t
HD,DATO(MIN)
Minimum Data Hold Time Output 300 900 ns
t
SU,DAT(MIN)
Minimum Data Set-Up Time Input 100 ns
t
SP(MAX)
Maximum Suppressed Spike Pulse Width 50 250 ns
C
X
SCL, SDA Input Capacitance 10 pF
The l denotes the specifications which apply over the full operating
temperature range, otherwise specifications are at T
A
= 25°C. V
CC
= 3.3V, unless otherwise noted.
ELECTRICAL CHARACTERISTICS
Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.