Manualshelf

Datasheet

ManualsBrandsLINEAR TECHNOLOGY ManualsPMICsPMIC - power supply controllers/monitors 10 mA QFN 64 (9x9)
61626364656667686970
LTC2974
69
2974fc
For more information www.linear.com/LTC2974
MFR_VIN_PEAK
This command returns the maximum ADC measured value of the input voltage. This register is reset to 0x7C00
(–2
25
) when the LTC2974 emerges from power-on reset or when a CLEAR_FAULTS command is executed.
MFR_VOUT_PEAK
This command returns the maximum ADC measured value of the channel’s output voltage. This register is reset to
0xF800 (0.0) when the LTC2974 emerges from power-on reset or when a CLEAR_FAULTS command is executed.
MFR_IOUT_PEAK
This commands returns the maximum ADC measured value of the channel’s output current. This register is reset to
0x7C00 (–2
25
) when the LTC2974 emerges from power-on reset or when a CLEAR_FAULTS command is executed.
MFR_TEMPERATURE_1_PEAK
This command returns the maximum measured value of the external diode temperature in °C. This register is reset
to 0x7C00 (–2
25
) when the LTC2974 emerges from power-on reset or when a CLEAR_FAULTS command is executed.
MFR_VIN_MIN
This command returns the minimum ADC measured value of the input voltage. This register is reset to 0x7BFF (ap
-
proximately 2
25
) when the LTC2974 emerges from power-on reset or when a CLEAR_FAULTS command is executed.
MFR_VOUT_MIN
This command returns the minimum ADC measured value of the channel’s output voltage. This register is reset to
0xFFFF (7.9999) when the LTC2974 emerges from power-on reset or when a CLEAR_FAULTS command is executed.
Updates are disabled when Margin Low (Ignore Faults and Warnings) is enabled.
MFR_IOUT_MIN
This command returns the minimum ADC measured values of the channel’s output current. This register is reset to
0x7BFF (approximately 2
25
) when the LTC2974 emerges from power-on reset or when a CLEAR_FAULTS command
is executed.
MFR_TEMPERATURE_1_MIN
This command returns the minimum measured value of the external diode temperature in °C. This register is reset to
0x7BFF (approximately 2
25
) when the LTC2974 emerges from power-on reset or when a CLEAR_FAULTS command
is executed.
pMbus coMManD DescripTion