Datasheet
LTC2283
2
2283fb
PIN CONFIGURATION ABSOLUTE MAXIMUM RATINGS
Supply Voltage (V
DD
) ..................................................4V
Digital Output Ground Voltage (OGND) ........ –0.3V to 1V
Analog Input Voltage (Note 3) .......–0.3V to (V
DD
+ 0.3V)
Digital Input Voltage ......................–0.3V to (V
DD
+ 0.3V)
Digital Output Voltage ................ –0.3V to (OV
DD
+ 0.3V)
Power Dissipation .............................................1500mW
Operating Temperature Range
LTC2283C ................................................ 0°C to 70°C
LTC2283I.............................................. –40°C to 85°C
Storage Temperature Range ................... –65°C to 150°C
OV
DD
= V
DD
(Notes 1, 2)
TOP VIEW
65
UP PACKAGE
64-LEAD (9mm × 9mm) PLASTIC QFN
T
JMAX
= 150°C, θ
JA
= 20°C/W
EXPOSED PAD (PIN 65) IS GND AND MUST BE SOLDERED TO PCB
A
INA
+
1
A
INA
–
2
REFHA 3
REFHA 4
REFLA 5
REFLA 6
V
DD
7
CLKA 8
CLKB 9
V
DD
10
REFLB 11
REFLB 12
REFHB 13
REFHB 14
A
INB
–
15
A
INB
+
16
48 DA5
47 DA4
46 DA3
45 DA2
44 DA1
43 DA0
42 NC
41 NC
40 CLKOUT
39 DB11
38 DB10
37 DB9
36 DB8
35 DB7
34 DB6
33 DB5
64 GND
63 V
DD
62 SENSEA
61 VCMA
60 MODE
59 SHDNA
58 OEA
57 OF
56 DA11
55 DA10
54 DA9
53 DA8
52 DA7
51 DA6
50 OGND
49 OV
DD
GND 17
V
DD
18
SENSEB 19
VCMB 20
MUX 21
SHDNB 22
OEB 23
NC 24
NC 25
DB0 26
DB1 27
DB2 28
DB3 29
DB4 30
OGND 31
OV
DD
32
ORDER INFORMATION
LEAD FREE FINISH TAPE AND REEL PART MARKING* PACKAGE DESCRIPTION TEMPERATURE RANGE
LTC2283CUP#PBF LTC2283CUP#TRPBF LTC2283UP 64-Lead (9mm × 9mm) Plastic QFN 0°C to 70°C
LTC2283IUP#PBF LTC2283IUP#TRPBF LTC2283UP 64-Lead (9mm × 9mm) Plastic QFN –40°C to 85°C
LEAD BASED FINISH TAPE AND REEL PART MARKING* PACKAGE DESCRIPTION TEMPERATURE RANGE
LTC2283CUP LTC2283CUP#TR LTC2283UP 64-Lead (9mm × 9mm) Plastic QFN 0°C to 70°C
LTC2283IUP LTC2283IUP#TR LTC2283UP 64-Lead (9mm × 9mm) Plastic QFN –40°C to 85°C
Consult LTC Marketing for parts specifi ed with wider operating temperature ranges. *The temperature grade is identifi ed by a label on the shipping container.
For more information on lead free part marking, go to: http://www.linear.com/leadfree/
For more information on tape and reel specifi cations, go to: http://www.linear.com/tapeandreel/
PARAMETER CONDITIONS MIN TYP MAX UNITS
Resolution (No Missing Codes)
●
12 Bits
Integral Linearity Error Differential Analog Input (Note 5)
●
–2 ±0.4 2 LSB
Differential Linearity Error Differential Analog Input
●
–0.9 ±0.2 0.9 LSB
Offset Error (Note 6)
●
–12 ±2 12 mV
Gain Error External Reference
●
–2.5 ±0.5 2.5 %FS
Offset Drift ±10 μV/°C
Full-Scale Drift Internal Reference ±30 ppm/°C
External Reference ±5 ppm/°C
Gain Matching External Reference ±0.3 %FS
The l denotes the specifi cations which apply over the full operating
temperature range, otherwise specifi cations are at T
A
= 25°C. (Note 4)
CONVERTER CHARACTERISTICS