Datasheet

8
LTC1693-5
PART NUMBER DESCRIPTION COMMENTS
LTC1154 High Side Micropower MOSFET Drivers Internal Charge Pump, 4.5V to 48V Supply Range, t
ON
= 80µs, t
OFF
= 28µs
LTC1155/LTC1156 Dual Micropower High/Low Side Drivers with 4.5V to 18V Supply Range
Internal Charge Pump
LTC1157 3.3V Dual Micropower High/Low Side Driver 3.3V or 5V Supply Range
LT
®
1160/LT1162 Half/Full Bridge N-Channel Power MOSFET Driver Dual Driver with Topside Floating Driver, 10V to 15V Supply Range
LT1161 Quad Protected High Side MOSFET Driver 8V to 48V Supply Range, t
ON
= 200µs, t
OFF
= 28µs
LTC1163 Triple 1.8V to 6V High Side MOSFET Driver 1.8V to 6V Supply Range, t
ON
= 95µs, t
OFF
= 45µs
LT1339 High Power Synchronous DC/DC Controller Current Mode Operation Up to 60V, Dual N-Channel Synchronous Drive
LTC1735 High Efficiency, Low Noise Current Mode 3.5V to 36V Operation with Ultrahigh Efficiency, Dual N-Channel MOSFET
Step-Down DC/DC Controller Synchronous Drive
LTC1693-1/LTC1693-2/ Single/Dual N-Channel MOSFET Drivers 1.5A Peak Output Current, Dual Drivers Permit High/Low Side Drive
LTC1693-3
LTC1981/LTC1982 SOT-23 High Side Drivers Integrated Voltage Triplers, 10µA Quiescent per Driver
 LINEAR TECHNOLOGY CORPORATION 2001
16935f LT/TP 0101 4K • PRINTED IN USA
RELATED PARTS
Linear Technology Corporation
1630 McCarthy Blvd., Milpitas, CA 95035-7417
[phone]
●
FAX: [phone]
●
www.linear-tech.com
PACKAGE DESCRIPTION
U
Dimensions in inches (millimeters) unless otherwise noted.
MS8 Package
8-Lead Plastic MSOP
(LTC DWG # 05-08-1660)
MSOP (MS8) 1100
* DIMENSION DOES NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. MOLD FLASH,
PROTRUSIONS OR GATE BURRS SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE
** DIMENSION DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSIONS.
INTERLEAD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE
0.021
± 0.006
(0.53 ± 0.015)
0
° – 6° TYP
SEATING
PLANE
0.007
(0.18)
0.043
(1.10)
MAX
0.009 – 0.015
(0.22 – 0.38)
0.005
± 0.002
(0.13 ± 0.05)
0.034
(0.86)
REF
0.0256
(0.65)
BSC
12
3
4
0.193 ± 0.006
(4.90 ± 0.15)
8
7
6
5
0.118 ± 0.004*
(3.00 ± 0.102)
0.118 ± 0.004**
(3.00 ± 0.102)