Datasheet

LTC1403-1/LTC1403A-1
19
14031fc
APPLICATIONS INFORMATION
int2 return _ enable ;48; external interrupt int2
nop
nop
nop
tint return _ enable ;4C; internal timer interrupt
nop
nop
nop
brint goto breceive ;50; BSP receive interrupt
nop
nop
nop
bxint goto bsend ;54; BSP transmit interrupt
nop
nop
nop
trint return _ enable ;58; TDM receive interrupt
nop
nop
nop
txint return _ enable ;5C; TDM transmit interrupt
nop
nop
int3 return _ enable ;60; external interrupt int3
nop
nop
nop
hpiint dgoto #0e4h ;64; HPIint * DO NOT MODIFY IF USING DEBUGGER *
nop
nop
.space 24*16 ;68-7F; reserved area
**********************************************************************
* (C) COPYRIGHT TEXAS INSTRUMENTS, INC. 1996 *
**********************************************************************
* *
* File: s2k14ini.ASM BSP initialization code for the ‘C54x DSKplus *
* for use with 1403 in buffered mode *
* BSPC and SPC are the same in the ‘C542 *
* BSPCE and SPCE seem the same in the ‘C542 *
**********************************************************************
.title “Buffered Serial Port Initialization Routine”
ON .set 1
OFF .set !ON
YES .set 1
NO .set !YES
BIT _ 8 .set 2
BIT _ 10 .set 1
BIT _ 12 .set 3
BIT _ 16 .set 0
GO .set 0x80
**********************************************************************
* This is an example of how to initialize the Buffered Serial Port (BSP).
* The BSP is initialized to require an external CLK and FSX for
* operation. The data format is 16-bits, burst mode, with autobuffering
* enabled.
*