Datasheet

7
LT1713/LT1714
UU
U
PI FU CTIO S
LT1713
V
+
(Pin 1): Positive Supply Voltage, Usually 5V.
+IN (Pin 2): Noninverting Input.
–IN (Pin 3): Inverting Input.
V
–
(Pin 4): Negative Supply Voltage, Usually 0V or –5V.
LATCH ENABLE (Pin 5): Latch Enable Input. With a logic
high the output is latched.
GND (Pin 6): Ground Supply Voltage, Usually 0V.
Q (Pin 7): Noninverting Output.
Q (Pin 8): Inverting Output.
LT1714
–IN A (Pin 1): Inverting Input of A Channel Comparator.
+IN A (Pin 2): Noninverting Input of A Channel
Comparator.
V
–
(Pins 3, 6): Negative Supply Voltage, Usually – 5V. Pins
3 and 6 should be connected together externally.
V
+
(Pins 4, 5): Positive Supply Voltage, Usually 5V. Pins
4 and 5 should be connected together externally.
+IN B (Pin 7): Noninverting Input of B Channel
Comparator.
–IN B (Pin 8): Inverting Input of B Channel Comparator.
LATCH ENABLE B (Pin 9): Latch Enable Input of B Channel
Comparator. With a logic high, the B output is latched.
GND (Pin 10): Ground Supply Voltage of B Channel
Comparator, Usually 0V.
Q B (Pin 11): Noninverting Output of B Channel
Comparator.
Q B (Pin 12): Inverting Output of B Channel
Comparator.
Q A (Pin 13): Inverting Output of A Channel
Comparator.
Q A (Pin 14): Noninverting Output of A Channel
Comparator.
GND (Pin 15): Ground Supply Voltage of A Channel
Comparator, Usually 0V
LATCH ENABLE A (Pin 16): Latch Enable Input of A Chan-
nel Comparator. With a logic high, the A output is latched.