Datasheet

LT1010
16
1010fe
SCHEMATIC DIAGRAM
(Excluding protection circuits)
Q13Q4
Q10Q9
Q3
Q2
Q1
Q12
Q15
C1
30pF
Q19Q17
R9
4k
R1
4k
R13
200Ω
R8
1k
R11
200Ω
R14
7Ω
R10
200Ω
R12
3k
Q14
Q18Q11
Q16
OUTPUT
V
–
INPUT
1010 SD
BIAS
V
+
Q20
Q8
R4
1k
R7
300Ω
R5
1.5k
R6
15Ω
R3
1k
R2
1k
Q7Q6
Q5
Q21
Q22
DEFINITION OF TERMS
Output Offset Voltage: The output voltage measured with
the input grounded (split supply operation).
Input Bias Current: The current out of the input terminal.
Large-Signal Voltage Gain: The ratio of the output volt-
age change to the input voltage change over the specified
input voltage range.*
Output Resistance: The ratio of the change in output volt-
age to the change in load current producing it.*
Output Saturation Voltage: The voltage between the
output and the supply rail at the limit of the output swing
toward that rail.
Saturation Offset Voltage: The output saturation voltage
with no load.
Saturation Resistance: The ratio of the change in output
saturation voltage to the change in current producing it,
going from no load to full load.*
Slew Rate: The average time rate of change of output
voltage over the specified output range with an input step
between the specified limits.
Bias Terminal Voltage: The voltage between the bias
terminal and V
+
.
Supply Current: The current at either supply terminal with
no output loading.
*Pulse measurements (~1ms) as required to minimize thermal effects.