Datasheet
LTC2258-12
LTC2257-12/LTC2256-12
23
225812fd
For more information www.linear.com/LTC2258-12
Phase Shifting the Output Clock
In full-rate CMOS mode the data output bits normally
change at the same time as the falling edge of CLKOUT
+
,
so the rising edge of CLKOUT
+
can be used to latch the
output data. In double data rate CMOS and LVDS modes
the data output bits normally change at the same time as
the falling and rising edges of CLKOUT
+
. To allow adequate
setup-and-hold time when latching the data, the CLKOUT
+
signal may need to be phase shifted relative to the data
output bits. Most FPGAs have this feature; this is generally
the best place to adjust the timing.
The LTC2258-12/LTC2257-12/LTC2256-12 can also phase
shift the CLKOUT
+
/CLKOUT
–
signals by serially program-
ming mode control register A2. The output clock can be
shifted
by 0°, 45°, 90° or 135°. To use the phase shifting
feature the clock duty cycle stabilizer must be turned
on. Another control register bit can invert the polarity of
CLKOUT
+
and CLKOUT
–
, independently of the phase shift.
The combination of these two features enables phase shifts
of 45° up to 315° (Figure 14).
DATA FORMAT
Table 1 shows the relationship between the analog input
voltage, the digital data output bits and the overflow bit.
By default the output data format is offset binary. The 2’s
complement format can be selected by serially program
-
ming mode control register A4.
Table 1. Output Codes vs Input Voltage
A
IN
+
– A
IN
–
(2V RANGE)
OF
D11-D0
(OFFSET BINAR
Y)
D11-D0
(2’s COMPLEMENT)
>+1.000000V
+0.999512V
+0.999024V
1
0
0
1111 1111 1111
1111 1111 1111
1111 1111 1110
0111 1111 1111
0111 1111 1111
0111 1111 1110
+0.000488V
0.000000V
–0.000488V
–0.000976V
0
0
0
0
1000 0000 0001
1000 0000 0000
0111 1111 1111
0111 1111 1110
0000 0000 0001
0000 0000 0000
1111 1111 1111
1111 1111 1110
–0.999512V
–1.000000V
≤–1.000000V
0
0
1
0000 0000 0001
0000 0000 0000
0000 0000 0000
1000 0000 0001
1000 0000 0000
1000 0000 0000
applicaTions inForMaTion
CLKOUT
+
D0-D11, OF
PHASE
SHIFT
0°
45°
90°
135°
180°
225°
270°
315°
CLKINV
0
0
0
0
1
1
1
1
CLKPHASE1
MODE CONTROL BITS
0
0
1
1
0
0
1
1
CLKPHASE0
0
1
0
1
0
1
0
1
225812 F14
ENC
+
Figure 14. Phase Shifting CLKOUT